Unusual sounds, no response to commands, and error messages are a few signs of hard drive failure. And, if you do nothing, it will lead to the hard drive dead and permanent data loss.
As you notice early hard drive (HDD) failure signs, back up your data and try to save your device.
Your hard drive can fail because of logical errors, external factors, and even manufacturer issues. But you cannot exclude usage. And for this reason, knowing how you can affect your HDD lifespan helps to prevent failures.
Our devices store vast amounts of precious, priceless, and crucial information. Encountering failures and all the subsequent data losses can be extremely frustrating. Although HDD has a limited lifespan of 3 to 5 years, you can make it last and use it to its full potential once you know how to prevent failures.
A wide variety of causes can shorten the lifespan of your hard drive.
For instance, if you dropped your HDD, then the cause for a hard drive failure it’s pretty obvious. However, some hard disk drive malfunctions might require some further investigation.
In case your computer is experiencing any of the above hard drive failure symptoms, the best would be to turn the device off.
Being aware of the signs your hard drive gives before collapse is not different from paying attention to any symptom your body presents. And just like when you take medicine to get better, you can take action for each HDD failure sign to preserve it and save your data.
While being quite reliable, the smallest fault can cause hard drive failure. Physical contact or damage, heat, humidity, dust, power surges, or even time can cause hard drive failure. Dust, water, or dropping are some reasons HDDs fail, shortening their lifespan. Avoid taking your device with you when it’s not needed and cleaning it helps you conserve the hard drive and the data on it.
There are three basic types of issues a hard drive may experience: logical failures, mechanical failures, and firmware failures.
Since they differ in approach to solving, it is important to recognize which one you’re dealing with, so that you can recover your data safely after a fault.
Hard drives represent complex devices that include many moving components. As soon as any of those important parts get damaged due to shock or control errors, the hard disk malfunctions, and failures occur.
Power surges can fry the electrical components in a computer. If one board gets damaged due to power spikes, you lose access to your data.
Symptoms:
A malfunctioning fan or blocked vent could overheat your CPU.
Symptoms:
Damage in the forms of spills, natural disasters, and humidity.
Dropping a hard drive, as well as vibration over time, can cause various parts to stop working.
If the fire alone didn’t damage the casing enough, most likely the heat generated will demagnetize the platter. You can also add the water damage as a result of firefighting.
Logical failure refers to any non-physical issue types, such as accidental deletion, unintentional formatting, software bugs, file corruption, system corruption, malware, etc.
Malware, spyware, ransomware, and other viruses can hold your files hostage.
Editing settings of the operating system registry or improper installation or removal of applications can affect a hard drive reboot.
Firmware failures are like logical failures. Your computer might recognize your drive, however, because of problems with its firmware, it won’t be able to access the data. In this event, the hard drive might have troubles during booting up (freezes), and be recognized wrongly/not to be recognized by your computer at all.
Follow the next steps to troubleshoot faulty hard drives and recover lost data from damaged disks.
Step 1. Clean up
Start by cleaning out any computer vent from debris and dust. A clogged vent might be causing your failing hard drive to overheat.
Step 2. Check cables
Next, check all power and data cables for proper connection. If these are plugged in correctly and yet no sign of activity, try replacing the power cable.
Step 3. Run BIOS
In case your device can boot, you can run a BIOS or a S.M.A.R.T. check to identify the issue.
Important:
Do NOT try to fix a physically damaged HDD yourself unless you truly are confident in the problem and solution.
Don’t open a failed hard drive. You can cause the needle head to scratch the platter or a speck of dust can block its mechanism.
Depending on the hard drive failure complexity, a professional data recovery service is best advised. SalvageData offers free evaluation and keeps an ISO-certified cleanroom for opening HDDs.
The best way to prevent data loss remains to do regular backups of your computer’s data. But, if any of these failures already happened, contact a SalvageData data recovery expert.
Although you can perform some easy fixes on your own, such as logical issues, most hard drive errors demand sterilized labs and technical knowledge. Therefore, we recommend that you always seek professional help in this case.
In a recent data recovery service case, the SalvageData recovery team achieved a remarkable feat…
A corrupted database on PS4 occurs when the system's organized data collection becomes damaged or…
Encountering a black or blank screen on your Windows computer can be frustrating and alarming.…
LockBit ransomware has emerged as one of the most dangerous and prolific cyber threats in…
Recovery mode is a crucial feature for troubleshooting and restoring an iPad when it encounters…
Whether you’re a professional juggling important work documents or an individual cherishing irreplaceable memories, safeguarding…